Specifications:
|
|
| Swing over bed |
31-3/8"
|
| Swing over front carriage wings
|
28-1/2" |
| Swing past front crosslide |
24-1/2" |
| Distance from chuck face to turret face |
95-1/2" max. |
| Hole through spindle |
12-1/2" |
| Spindle nose
|
A1-20 |
| Spindle speeds
(36) |
7-395 RPM |
| Feeds to rear saddle |
0.005-.176 IPR, infinitely variable |
| Floor space required
|
9' X 21' |
| Weight of machine and
accessories |
36,000 lbs. |
| Main
motor |
50 HP, 1775 RPM, 208-220/440 volts, 3-ph., 60
cycle, 129/64.5 amps |
| 3 HP / 2 HP DC variable-speed feed drive/rapid
traverse motors to rear saddle, with 5 HP motor-generator |
EQUIPPED WITH:
|
|
| Crossliding square turret on rear saddle, turret does not index, and is equipped with a 3-7/8" hole through the turret in the Z-axis direction
|
|
Rear-mounted hydraulic tracer to turret with full-length template rail.
|
|
Independent DC variable-rate longitudinal turret saddle feed and rapid traverse via separate ballscrew feed.
|
|
4-way rapid traverse to rear turret
|
|
2' extended bed length
|
|
Pre-select headstock |
|
Pendant controls Hard bedways, hard inserted crosslide and turret crosslide ways
crosslide Coolant |
| Front & rear 24" dia. |
| 4-jaw chucks with 12-5/8" hole, with 2-piece top jaws 9" square quick-indexing
toolpost on front crosslide |
| 4-position rotating turret stop on front |
